nav emailalert searchbtn searchbox tablepage yinyongbenwen piczone journalimg journalInfo journalinfonormal searchdiv searchzone qikanlogo popupnotification paper paperNew
2026, 10, No.632 1-6
基于点云的包含狭长区域的复杂曲面喷涂轨迹规划
基金项目(Foundation): 河北省省级科技计划资助项目(24464401D)
邮箱(Email):
DOI: 10.13462/j.cnki.mmtamt.2026.10.001
发布时间: 2026-10-20
出版时间: 2026-10-20
移动端阅读
摘要:

针对现有喷涂轨迹规划方法在处理具有狭长区域的复杂工件时,存在喷涂厚度不均匀、作业时间长和涂料浪费等问题,设计一种分区自适应的喷涂路径生成策略。该策略基于复杂工件的点云模型,提出一种改进区域生长的点云分割算法,通过曲面变分值精准提取低曲率狭长区域,并通过检查邻域标记比例迭代补充分割高曲率狭长区域及边界模糊点。对于分割得到的狭长区域,采用改进L1-中值骨架提取算法提取喷涂轨迹点,并通过平滑样条插值拟合骨架点生成喷涂路径;对于密集区域,通过切片法生成喷涂轨迹。通过对汽车车门和车尾门的仿真结果表明,该方法针对具有狭长区域的复杂工件喷涂时,能够有效降低喷涂时间,提高涂层厚度的均匀性。

Abstract:

To address the issues of uneven coating thickness, long operation time, and paint waste in existing spray trajectory planning methods when handling complex workpieces with narrow and elongated regions, a partitioned adaptive spray path generation strategy is proposed. This strategy is based on the point cloud model of complex workpieces and introduces an improved region-growing point cloud segmentation algorithm. It accurately extracts low-curvature narrow regions using surface variation values, and iteratively supplements the segmentation of high-curvature narrow regions and boundary-ambiguous points by checking the proportion of labeled neighbors. For the segmented narrow regions, an improved L1-median skeleton extraction algorithm is employed to extract spray trajectory points, followed by smooth spline interpolation to fit the skeleton points and generate the spray path. For dense regions, the slicing method is used to generate spray trajectories. Experimental results on automotive door and tailgate components demonstrate that this method effectively reduces spraying time and improves coating thickness uniformity when spraying complex workpieces with narrow and elongated regions.

参考文献

[1] Brunello A,Fabris G,Gasparetto A,et al.A survey on recent trends in robotics and artificial intelligence in the furniture industry[J].Robotics and Computer-Integrated Manufacturing,2025,93:102920.

[2] 刘亚军,訾斌,王正雨,等.智能喷涂机器人关键技术研究现状及进展[J].机械工程学报,2022,58(7):53-74.

[3] 唐倩,黄耀,范秋垒,等.基于点云与图像匹配的自动化喷涂系统坐标变换[J].计算机集成制造系统,2017,23(11):2392-2398.

[4] 刘今越,李文秀,贾晓辉,等.基于场景点云重建的移动焊接机器人作业轨迹提取方法[J].计算机集成制造系统,2024,30(7):2381-2388.

[5] Yu X Y,Cheng Z Y,Zhang Y K,et al.Point cloud modeling and slicing algorithm for trajectory planning of spray painting robot[J].Robotica,2021,39(12):2246-2267.

[6] Yang J B,Kong M X,Wang R D.A path planning algorithm of spray robot based on 3D point cloud[C]//2020 International Conference on Communications,Information System and Computer Engineering (CISCE),2020:353-360.

[7] 苏成志,刘军,李华,等.曲面边缘均匀喷涂的路径分片规划方法[J].机床与液压,2022,50(5):90-96.

[8] Liu Z Y,Cheng S,Su Y H,et al.Semantic segmentation based spraying trajectory planning for complex product[J].IEEE Transactions on Industrial Informatics,2024,20(7):9416-9426.

[9] 苏成志,王虹霖,徐朕,等.复杂曲面喷涂姿态自主规划方法[J].机床与液压,2023,51(5):23-28.

[10] 程昶运,熊瑞平,王波,等.壳体曲面的机械臂喷涂路径规划方法研究[J].组合机床与自动化加工技术,2020(3):49-54.

[11] Hua R X,Ma H X,Zou W,et al.A spraying path planning algorithm based on point cloud segmentation and trajectory sequence optimization[J].International Journal of Control,Automation and Systems,2024,22(2):615-630.

[12] Kong M X,Li A,Gao F.A trajectory planning algorithm of spray robot for workpieces with complex geometric features based on 3D point cloud[C]//2021 IEEE 5th Information Technology,Networking,Electronic and Automation Control Conference (ITNEC),2021:13-20.

[13] Huang H,Wu S H,Cohen-Or D,et al.L1-medial skeleton of point cloud[J].ACM Transactions on Graphics,2013,32(4):1-8.

[14] 欧阳浩,陈波,黄镇谨,等.基于K-means的最小生成树聚类算法[J].组合机床与自动化加工技术,2014(4):41-44,52.

[15] 李龙,郑权,赵东波,等.机器人多参数喷涂厚度模型分析与试验研究[J].机床与液压,2025,53(5):47-51.

[16] 姜世阔,王小平,汪凯,等.基于点云曲面的定角度自动铺丝路径规划[J].中国机械工程,2023,34(21):2629-2636,2645.

基本信息:

DOI:10.13462/j.cnki.mmtamt.2026.10.001

中图分类号:TH16

引用信息:

[1]荆锴,李锦涛,姜藩,等.基于点云的包含狭长区域的复杂曲面喷涂轨迹规划[J].组合机床与自动化加工技术,2026,No.632(10):1-6.DOI:10.13462/j.cnki.mmtamt.2026.10.001.

基金信息:

河北省省级科技计划资助项目(24464401D)

发布时间:

2026-10-20

出版时间:

2026-10-20

引用

GB/T 7714-2015 格式引文
MLA格式引文
APA格式引文